Fading on north and west elevations
A change like this usually means the coating is losing its grip, and it is cheaper to act while the surface underneath is still sound.

Exterior repaints built for Geelong weather: cold wet winters, dry northerly heat and salt-carrying wind off the bay. Cladding, render, eaves and trim are washed, treated, sealed and coated in the colours you choose.
Exterior coatings around Geelong take punishment from two directions. Winter keeps shaded walls damp for weeks, then summer northerlies and high UV bake the same surfaces. Coastal streets on the Bellarine and Surf Coast add airborne salt on top of that.
We travel to properties throughout Geelong's inland suburbs and out across the Bellarine and Surf Coast. The assessment weighs up preparation, access, the coating already on the surface and the finish you are after before any figure is put in writing.

Repairs and specialist trades beyond the agreed painting work are listed separately rather than buried inside a vague line item. You will know what is quoted and what is not.
A change like this usually means the coating is losing its grip, and it is cheaper to act while the surface underneath is still sound.
A change like this usually means the coating is losing its grip, and it is cheaper to act while the surface underneath is still sound.
A change like this usually means the coating is losing its grip, and it is cheaper to act while the surface underneath is still sound.
A change like this usually means the coating is losing its grip, and it is cheaper to act while the surface underneath is still sound.
A change like this usually means the coating is losing its grip, and it is cheaper to act while the surface underneath is still sound.

Each stage is checked against the written scope and against the weather and conditions on the day.
Each stage is checked against the written scope and against the weather and conditions on the day.
Each stage is checked against the written scope and against the weather and conditions on the day.
Each stage is checked against the written scope and against the weather and conditions on the day.
Each stage is checked against the written scope and against the weather and conditions on the day.
The week the job wraps up they look much the same. One winter and one hot summer later, they do not.
Salt and moisture stay trapped under the film, so peeling and mould usually return at the same spots.
The coating bonds to a sound, sealed surface, so the next maintenance visit is a wash and a touch-up rather than a strip-back.
Board ends, splits and soft spots get looked at first. Timber swells through winter and shrinks in summer heat, so flexible coatings and fully primed bare patches beat an extra topcoat.
Fine cracks are opened up and filled with a flexible product, and fresh or patched render takes an alkali-resistant sealer so the colour above it stays stable.
Express joints, sheet ends and fixings are sealed properly. That detail is what keeps driving rain from tracking in behind the cladding.
Rust is ground back and treated, then a metal primer goes on before any finish coat is even opened.
Efflorescence is brushed off and porosity tested, because thirsty older Geelong brickwork can swallow a first coat without the right sealer under it.
Wash, sand back raised grain and replace boards that are past saving, then coat with something built for footfall, standing water and full afternoon sun.
We do not publish a flat rate, because two houses on the same street can need very different work. The scope is written after we have walked the property and seen the condition, the access and the substrate for ourselves.
Assessed during the on-site visit and written into the quote you receive.
Assessed during the on-site visit and written into the quote you receive.
Assessed during the on-site visit and written into the quote you receive.
Assessed during the on-site visit and written into the quote you receive.
Assessed during the on-site visit and written into the quote you receive.
Assessed during the on-site visit and written into the quote you receive.
We come out to properties in Newtown, Belmont, Highton, Grovedale, Waurn Ponds, Bell Park, Corio, Ocean Grove, Torquay, Barwon Heads and the streets around them. Choose your suburb for detail on local housing and exposure.
How preparation, access, substrate and scope decisions come together in a written painting quote.
Read the guideWhat to check after a wet Victorian winter and again before summer heat arrives.
Read the guideHow coastal exposure changes washing, priming and coating decisions on the Surf Coast.
Read the guideIt depends on substrate, exposure and previous coating quality, but coastal homes on the Bellarine and Surf Coast generally need attention sooner than more sheltered inland properties due to salt and sand exposure.
Yes, high-pressure washing to remove salt, mould, dirt and chalking paint residue is a standard part of our exterior preparation process.
We flag any rotten or damaged timber during inspection and preparation and can arrange repair or replacement before painting proceeds.
Homes built before 1970 may have lead-based paint under later coatings. Let us know your home's age at quoting stage so we can plan preparation accordingly.
We can work through winter but plan exterior work around stable, milder weather windows to ensure coatings have adequate time to cure before rain or overnight dew sets in.
Yes, we work on weatherboard, fibre cement, render and brick, matching preparation and primers to each specific substrate.
Chalking is generally caused by prolonged UV exposure breaking down the paint film's binders, common on Geelong's north and west-facing walls.
Yes, we rake out and reseal gaps and joints with a flexible, paintable sealant to help prevent water tracking in behind the cladding.
Yes, we can colour-match your existing scheme or advise on updated colours that perform well under strong coastal UV.
Call for a free quote or send the quote form on this page and we'll arrange a time to inspect your home's exterior and provide a written quote.
Yes, we prepare and coat painted metal surfaces including fascia and trims, treating any rust spots before applying a coating system suited to metal.
Yes, we assess access requirements during the inspection and plan appropriate equipment and scheduling for elevated or two-storey work.
The milder shoulder seasons generally offer the most stable conditions, though we can plan around most times of year with flexibility built in.
Call our Geelong painting team during business hours and describe the property. We will arrange an on-site assessment and a written quote.
Speak to a Geelong painter about your project and book an on-site assessment.